Zigbee Smart IR Remote Controller Universal Home Infrared Remote TV Air Conditioner Infrared Controller Timing for Android 4.0/iOS 8.0

Feature: 

1. Through this function, electrical appliances that do not match the remote controller code can also be controlled by normal remote controller.

2. You don’t need to choose a brand, you can directly find the remote controller code corresponding to the cloud code library through the learning of the Remote Controller buttons of the home appliance remote controller.

3. Support for Tmall Genie, for DuerOS, for Alexa, Google and other three-party voice speakers at home and abroad, and voice control of added devices, including multiple categories.

4. Through the scene and automation settings in the APP, it can be used as an execution condition to link with other smart devices. For example, if the temperature sensor detects that the temperature is greater than a certain set value, it will automatically turn on the air conditioner and turn on the cooling function.

5. Electrician sockets, light fixtures, sensor detection, large and small home appliances, unlimited categories, support the addition of remote controller functions, support MCU universal docking, SDK and other development docking.

Specification:

Product name: Universal infrared Remote Controller

Item model number: UFO-R11

Communication method: ZigBee

Communication Protocol: Zigbee 802.15.4

Working channel: 11-26@2.4002.483GHz

Supported devices: for Android 4.0/for ios 8.0 and above

Power supply method: AA alkaline batteries * 2 (not included)

Working current: <1A

Infrared emission angle: 360°

Infrared learning frequency: 38 kHz

Working temperature: -10℃~50℃

Working humidity: 10%~90%RH (non-condensing)

Infrared control distance: horizontal direction ≤ 8m, facing direction ≤ 15m (affected by the environment, the data comes from the laboratory)

Infrared learning distance: facing direction ≤ 3m, angle ± 45° (affected by the environment, the data comes from the laboratory)

Product APP: Support for Hongshi Smart, for SmartLife

Product size: about 68x68x27mm/2.68×2.68×1.06 inch

Packing weight: about 106g

Steps for usage:

Distribution network:

1. The product is shipped from the factory, with the default network configuration;

2. After the product is installed, the battery is powered on, the network distribution indicator flashes quickly, and the product enters the state of waiting for network distribution.

3. Connect the mobile phone to the ZigBee gateway, and add a search device to the gateway APP interface.

4. Press the Add button of the device, jump to the Add Remote Controller interface, and add it according to the device category and brand.

5. Successfully added device.

Reset:

1. There is a reset button in the battery compartment, press and hold for 3 seconds, the product enters the state of waiting for network distribution, and the LED indicator starts to flash quickly.

LED connection status:

1. Blinking means to be connected.

2. Always off means connected.

3. Steady on means the Wi-Fi information has been configured, but can not be connected.

4. Press and hold the button for 5 seconds and see the red indicator flashes several times, which means the reset is successful.

Note:

Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!

Please allow 1-2cm measuring deviation due to manual measurement.

 

1*Zigbee Infrared Remote Controller Host

1*Instruction